Posted on

HRM 599 Homework Week 3 Homework Assignment Article Review II A+ Answer

HRM 599 Homework Week 3 Homework Assignment Article Review II Answer

Please find an article related to healthcare programs. To help locate your article, you can utilize the DeVry University library through THE|HUB, or you may locate the article through your own source. The article should be from a current professional source that you would read as a manager in the benefits field. It should be a source that you would feel comfortable taking forward to your employer.
Once you have located and read your article, please complete a review of the article. The article review should consist of the following.
• It should contain a summary of the article (two to three paragraphs maximum). Why was the article written about the topic at the current time? This should be completed in your own words and talk about the key points of the article. You should not repeat the article in your summary.
• How does this relate to the learning for the week in class? What laws and concepts are covered that would help you in the area of benefits? How could you further elaborate on the concepts in the article?
• Based upon the article, what recommendations would you provide to the business community (an employer) from reading the article?
The article review must be completed in the APA format and utilize proper grammar. Papers without a reference page will receive 0 points. The paper should be three to five pages in total. The article will be graded based upon the Benefits Rubric.

Please click on the “PURCHASE” link below to get all the DQ, quiz and assignment answers for HRM599_ Homework Week 3 Homework Assignment Article Review II Answer as mentioned below.

For instant digital download of the above solution or tutorial, please click on the below link and make an instant purchase. You will be guided to the PAYPAL Standard payment page wherein you can pay and you will receive an email immediately with a download link. Please note that in case of technical glitch, the solutions will be emailed to you within 24 hours.

In case you find any problem in getting the download link or downloading the tutorial, please send us an email on mail@genietutorial.com

HRM 599 week 3

Posted on

PROJ 592 Proj Cost and Schedule Control Week 3 Quiz Answer

PROJ 592 Proj Cost and Schedule Control Week 3 Quiz Answer

PROJ 592 Proj Cost and Schedule Control Week 3 Quiz Answer

Week 3 : Project Time Management – Quiz

Question 1. 1. (TCO B) Good project cost estimations are critical to a successful project. With that in mind, compare and contrast three-point and reserve analysis estimation techniques. Please provide an example of each. (Points : 20)

Question 2. 2. (TCO A) A company intends to establish a manufacturing facility by buying an existing factory from a company in the same industry. A state-of-the art manufacturing line with supporting utilities will be established in the refurbished factory.

Securing the building will involve negotiating the purchase and refurbishing and upgrading the building structure.

Utilities that have to be upgraded and new systems installed include an upgrade of the electrical system, installation of a new compressed air system, and an increase in the capacity of the plant wastewater treatment system.

Establishing the manufacturing line will require development of production equipment specifications, procurement, and installation of machines and materials handling systems. A systems test plan will be developed concurrently with preparation of the equipment specifications. To check out the manufacturing line, a systems test of the complete line will be performed by operating it to produce product. A separate project team is handling procurement and stocking of components and materials that will be needed for the systems test of the new line, as well as when it becomes fully operational.

Prepare a WBS listing for this project with activities corresponding to a two-level task and subtask hierarchy. Format the WBS listing with activity item indents and WBS codes (such as a numbering scheme) that will clearly identify the level of each activity. Provide columns showing the WBS code and activities.
(Points : 20)

Question 3. 3. (TCO E) You are assisting on a project for your organization. An RACI has been created for your project. Your project manager has asked you to interpret the below RACI.
Project Name: New marketing campaign RACI
Activity PM IT Market Test Group Marketing Sponsor Account Manager
1.1.1 Create new layout A R R C
2.1.1 Design campaign A R
3.1.1 Test market R A
4.1.1 Roll out campaign R I A
(Points : 20)

Question 4. 4. (TCO B) You are the project manager for three projects. You are about to estimate costs for these three projects. Given the below information on each project, recommend an appropriate estimation method and justify your answer for each.

Project A: This project will be a scale-up of a project done last year. All the same processes will be used. The costs for the material and other resources should be scalable based on last year’s costs.

Project B: This project is new to your company. You do not feel confident in estimating the project costs using internal resources. There are other companies that have done this type of work. Yet you still want the most accurate estimates possible.

Project C: The work of this project has not likely been done before by anyone. You are breaking technological barriers in this project. As such, it is imperative you get accurate cost estimates. (Points : 20)

Question 5. 5. (TCO C) The SuperFlyer Corporation is developing a revolutionary flying disc. The new toy can fly straight over a great distance, which is exciting by itself. However, this disc will also return to the owner in response to his or her voice! Because this is an advance over anything that this company has done before, estimating the amount and cost of the hi-tech materials is difficult. The project manager recommends using a range estimating process to develop an estimate. The values below are submitted by the project team.

Current estimates for cost of material are as follows.
Optimistic cost of smart resin: $5.00 per lb
Most likely cost of smart resin: $6.00 per lb
Pessimistic cost of smart resin: $7.50 per lb

Current estimates for total material requirements are as follows.
Optimistic quantity 20 lb / 100 units
Most likely quantity 25 lb / 100 units
Pessimistic quantity 35 lb / 100 units

(a) What is the expected price of the material per pound?
(b) What is the expected amount of material needed for 100 units?
(c) What is the expected cost for 100 units? (Points : 20)

For getting the instant download solution, Please click on the “PURCHASE” link below to get “PROJ 592 Proj Cost and Schedule Control Week 3 Quiz A+ Answer”.

For instant digital download of the above solution or tutorial, please click on the below link and make an instant purchase. You will be guided to the PAYPAL Standard payment page wherein you can pay and you will receive an email immediately with a download link. Please note that in case of technical glitch, the solutions will be emailed to you within 24 hours.

In case you find any problem in getting the download link or downloading the tutorial, please send us an email on mail@genietutorial.com

PROJ 592 Course Project week 3 Quiz

Posted on

MGMT 550 Managerial Communication Week 3 Comparison Report A+ Answer

MGMT 550 Managerial Communication Week 3 Comparison Report A+ Answer

MGMT 550 Managerial Communication Week 3 Comparison Report A+ Answer

Week 3 Assignment:

Comparison Report. Write a 3 to 4 page report comparing the communication strategies of the Facebook pages of two of the following companies:

•McDonald’s, Burger King
•J C Penney, Kohl’s
•Dunkin’ Donuts, Krispy Kreme Doughnuts
•Pepsi Max, Coca-Cola Zero
•Target, Wal-Mart
•Amazon, Barnes & Noble

Suggested Format:

This week you will write a compare and contrast report. Your paper should discuss each of the companies and then discuss their similarities and differences. When looking at each company’s

Facebook page, use the same criteria to evaluate each of them, which will assist with the compare and contrast evaluation. Your paper should have at least 3 to 4 pages of body text plus the title

page and reference page.

Include the following sections:

•Title Page
•Introduction
•Discuss the first company
•Discuss the second company
•Compare and contrast the two companies
•Conclusion
•References

For getting the instant digital download answer, Please click on the “PURCHASE” link below to get “MGMT 550 Managerial Communication Week 3 Comparison Report_Answer”.

For instant digital download of the above solution or tutorial, please click on the below link and make an instant purchase. You will be guided to the PAYPAL Standard payment page wherein you can pay and you will receive an email immediately with a download link. Please note that in case of technical glitch, the solutions will be emailed to you within 24 hours.

In case you find any problem in getting the download link or downloading the tutorial, please send us an email on mail@genietutorial.com

MGMT 550 WEEK 3

Posted on

PROJ 598 Contracts and Procurement Week 3 Types of Contracts Quiz Answer

PROJ 598 Contracts and Procurement Week 3 Types of Contracts Quiz Answer

Week 3 : Types of Contracts – Quiz

Question 1. 1. (TCO B) All of the below would be considered good selection criteria for a buyer to use to select a seller, except (Points : 10)
proprietary rights of buyer, overall cost, and warrantee offered by seller.
past work done by seller, intellectual property rights, and risk associated with a given seller.
technical capability of seller, understanding of work by seller, and business type of seller.
managerial approach of seller, capacity of seller to do the work, and ability of seller to make a reasonable make-or-buy decision.

Question 2. 2. (TCO A) In industry, there are four processes one follows in the procurement area of project management. Describe and explain these four processes in the procurement management process for the buyer. (Points : 30)

Question 3. 3. (TCO C) Compare and contrast a firm fixed-price contract with a cost-plus contract. When would each be appropriate for a given project? (Points : 30)

Question 4. 4. (TCO D) Compare and contrast an RFP, an IFB, and an RFI. When would each best be used in procuring goods or services? (Points : 30)

For getting the instant digital download solution, Please click on the “PURCHASE” link below to get PROJ 598 Contracts and Procurement Week 3 Types of Contracts Quiz A+ Answer

Please click on the below link and make an instant purchase. You will be guided to the PAYPAL Standard payment page wherein you can pay and you will receive an email immediately with a download link. Please note that in case of technical glitch, the solutions will be emailed to you within 24 hours.

In case you find any problem in getting the download link or downloading the tutorial, please send us an email on mail@genietutorial.com

PROJ 598 Week 3

Posted on

ACCT 505 Managerial Accounting Week 2 Job Order and Process Costing Systems Quiz Answer

ACCT 505 Managerial Accounting Week 2 Job Order and Process Costing Systems Quiz Answer

ACCT-505 Managerial Accounting_Week 2 Job Order and Process Costing Systems – Quiz

Set 1

1. Question : (TCO F) For which situation(s) below would an organization be more likely to use a job-order costing system of accumulating product costs rather than a process costing system?

: A steel factory that processes iron ore into steel bars

A factory that processes sugar and other ingredients into black licorice
A costume maker that makes specialty costumes for figure skaters
All of these

2. Question : (TCO F) Process costing would be appropriate for each of the following except:

: custom furniture manufacturing.

oil refining.

grain milling.

newsprint production.

3. Question : (TCO F) Lucas Company uses the weighted-average method in its process costing system. The company adds materials at the beginning of the process in the Forming Department, which is the first of two stages in its production process. Information concerning operations in the Forming Department in October follows:
Units Material Cost
Work in process on October 1 6,000 $3,000
Units started in October 50,000 $25,560
Units completed and transferred to next Department during October 44,000

What was the materials cost of work in process at on October 31?

4. Question : (TCO F) In a job-order costing system, the use of direct materials that have been previously purchased is recorded as a debit to:

: Raw Materials Inventory.

Work in Process Inventory

Finished Goods Inventory

Manufacturing Overhead

5. Question : (TCO F) During December at Ingrim Corporation, $74,000 of raw materials were requisitioned from the storeroom for use in production. These raw materials included both direct and indirect materials. The indirect materials totaled $6,000. The journal entry to record the requisition from the storeroom would include a:

: debit to Raw Materials of $74,000.

debit to Work in Process of $68,000.

credit to Manufacturing Overhead of $6,000.

debit to Work in Process of $74,000.

6. Question : (TCO F) Valles Corporation had $22,000 of raw materials on hand on February 1. During the month, the company purchased an additional $75,000 of raw materials. The journal entry to record the purchase of raw materials would include a:

: credit to Raw Materials of $97,000.

debit to Raw Materials of $97,000.

credit to Raw Materials of $75,000.

debit to Raw Materials of $75,000.

1. Question : (TCO F) Whether a company uses process costing or job-order costing depends on its industry. A number of companies in different industries are listed below:

i. Brick manufacturer
ii. Contract printer that produces posters, books, and pamphlets to order
iii. Natural gas production company
iv. Dairy farm
v. Coal mining company
vi. Specialty coffee roaster (roasts small batches of specialty coffee beans)

For each company, indicate whether the company is most likely to use job-order costing or process costing.

2. Question : (TCO F) Job 484 was recently completed. The following data have been recorded on its job cost sheet:
Direct materials $57,240
Direct labor hours 1,692 DLHs
Direct labor wage rate $12 per DLHS
Number of units completed 3,600 units

The company applies manufacturing overhead on the basis of direct labor-hours. The predetermined overhead rate is $24 per direct labor-hour.

Compute the unit product cost that would appear on the job cost sheet for this job.

3. Question : (TCO F) Miller Company manufactures a product for which materials are added at the beginning of the manufacturing process. A review of the company’s inventory and cost records for the most recently completed year revealed the following information:
Units Materials Conversion
Work in process. Jan. 1 (80% complete with respect to conversion costs) 100,000 $100,000 $157,500
Units started into production 500,000
Costs added during the year:
Materials $650,000
Conversion $997,500
Units completed during the year 450,000

The company uses the weighted-average cost method in its process costing system. The ending inventory is 50% complete with respect to conversion costs.

Required:

i. Compute the equivalent units of production and the cost per equivalent units for materials and for conversion costs.

ii. Determine the cost transferred to finished goods.

iii. Determine the amount of cost that should be assigned to the ending work in process inventory.

4. Question : (TCO F) Weisinger Corporation has provided the following data for the month of January:
Inventories Beginning Ending
Raw materials $28,000 $29,000
Work In process $16,000 $14,000
Finished goods $42,000 $54,000

Additional Information
Raw material purchases $56,000
Direct labor costs $87,000
Manufacturing overhead cost incurred $51,000
Indirect materials included in manufacturing overhead costs incurred $3,000
Manufacturing overhead cost applied to work in process $55,000

Prepare a Schedule of Cost of Goods Manufactured and a Schedule of Cost of Goods Sold in good form.

Set 2

Question 1. 1. (TCO F) For which situation(s) below would an organization be more likely to use a job-order costing system of accumulating product costs rather than a process costing system? (Points : 5)
A steel factory that processes iron ore into steel bars
A factory that processes sugar and other ingredients into black licorice
A costume maker that makes specialty costumes for figure skaters
All of these

Question 2. 2. (TCO F) Luft Company uses the weighted-average method in its process costing system. Operating data for the first processing department for the month of June appear below:

Units Percent Complete with respect to Conversion
Beginning work in process inventory 11,000 90%
Started in production during June 58,000
Ending work in process inventory 17,000 10%

According to the company’s records, the conversion cost in beginning work in process inventory was $79,893 at the beginning of June. Additional conversion costs of $343,830 were incurred in the department during the month.

What was the cost per equivalent unit for conversion costs for the month? (Round off to three decimal places.) (Points : 5)
$8.070
$7.891
$5.928
$4.584

Question 3. 3. (TCO F) Unizat Corporation uses the weighted-average method in its process costing system. The following information pertains to one of the company’s processing departments for a recent month:

Units Material Cost
Beginning work in process 30,000 $22,000
Started during the month 80,000 $72,000
Units completed 85,000
Ending work in process 25,000

All materials are added at the beginning of the process. The cost per equivalent unit for materials is closest to: (Points : 5)
$0.86
$0.90
$1.10
$1.18

Question 4. 4. (TCO F) Which of the following accounts is debited when direct labor is recorded? (Points : 5)
Work in process
Salaries and wages expense
Salaries and wages payable
Manufacturing overhead

Question 5. 5. (TCO F) During December at Ingrim Corporation, $74,000 of raw materials were requisitioned from the storeroom for use in production. These raw materials included both direct and indirect materials. The indirect materials totaled $6,000. The journal entry to record the requisition from the storeroom would include a: (Points : 5)
debit to Raw Materials of $74,000.
debit to Work in Process of $68,000.
credit to Manufacturing Overhead of $6,000.
debit to Work in Process of $74,000.

Question 6. 6. (TCO F) During February, Degan Inc. transferred $60,000 from Work in Process to Finished Goods and recorded a Cost of Goods Sold of $65,000. The journal entries to record these transactions would include a: (Points : 5)
debit to Finished Goods of $65,000.
credit to Cost of Goods Sold of $65,000.
credit to Work in Process of $60,000.
credit to Finished Goods of $60,000.

Page 2
Question 1. 1. (TCO F) Some companies use process costing and some use job-order costing. Which method a company uses depends on its industry. A number of companies in different industries are listed below:

i. Custom boat builder
ii. Frozen cranberry juice processor
iii. Concrete block manufacturer
iv. Winery that produces a number of varietal wines
v. Aluminum refiner that makes aluminum ingots from bauxite ore

For each company, indicate whether the company is most likely to use job-order costing or process costing.
(Points : 15)

Question 2. 2. (TCO F) Job 728 was recently completed. The following data have been recorded on its job cost sheet:

Direct materials $81,000
Direct labor hours 1,220 labor hours
Direct labor wage rate $15 per labor-hour
Machine Hours 1,520 machine hours
Number of units completed 4,400 units

The company applies manufacturing overhead on the basis of machine-hours. The predetermined overhead rate is $16 per machine-hour.

Compute the unit product cost that would appear on the job cost sheet for this job. (Points : 15)

Question 3. 3. (TCO F) Harmon Company uses the weighted-average method in its process costing system. The Curing Department of Harmon Company reported the following information for the month of November.
Units Percentage complete with respect to conversion
Work in process, November 1 10,000 80%
Units started 28,000
Completed and transferred out 30,000
Work in process, November 30 8,000 30%

Costs for November Materials Conversion
Work in process, November 1 $34,500 $48,600
Added during the month $146,000 $194,400

All materials are added at the beginning of the process.

Required: Compute the following items using the weighted-average method:

i. The equivalent units of production for materials.

ii. The cost per equivalent unit for conversion.

iii. The total cost assigned to units transferred out of the Curing Department during November.

iv. The cost assigned to work in process inventory as of November 30. (Points : 15)

Question 4. 4. (TCO F) Hunsicker Corporation has provided the following data for the month of January:

Inventories Beginning Ending
Raw materials $30,000 $33,000
Work In process $20,000 $18,000
Finished goods $52,000 $60,000

Additional Information
Raw material purchases $63,000
Direct labor costs $92,000
Manufacturing overhead cost incurred $75,000
Indirect materials included in manufacturing overhead costs incurred $6,000
Manufacturing overhead cost applied to work in process $69,000

Prepare a Schedule of Cost of Goods Manufactured and a Schedule of Cost of Goods Sold in good form.
(Points : 15)

Set 3

1. Question : (TCO F) Assume there is no beginning work in process inventory and the ending work in process inventory is 100% complete with respect to materials costs. The number of equivalent units with respect to materials costs under the weighted-average method is:
Student Answer:
the same as the number of units put into production.
less than the number of units put into production.
the same as the number of units completed.
less than the number of units completed.

2. Question : (TCO F) Which of the following companies would be most likely to use a job-order costing system rather than a process costing system?
Student Answer:
Fast food restaurant
Shipbuilding
Crude oil refining
Candy making
3. Question : (TCO F) Unizat Corporation uses the weighted-average method in its process costing system. The following information pertains to one of the company’s processing departments for a recent month:
Units Material Cost
Beginning work in process 30,000 $22,000
Started during the month 80,000 $72,000
Units completed 85,000
Ending work in process 25,000

All materials are added at the beginning of the process. The cost per equivalent unit for materials is closest to:

4. Question : (TCO F) Which of the following accounts is debited when direct labor is recorded?
Student Answer:
Work in process
Salaries and wages expense
Salaries and wages payable
Manufacturing overhead

5. Question : (TCO F) During December at Ingrim Corporation, $74,000 of raw materials were requisitioned from the storeroom for use in production. These raw materials included both direct and indirect materials. The indirect materials totaled $6,000. The journal entry to record the requisition from the storeroom would include a:
Student Answer:
debit to Raw Materials of $74,000.
debit to Work in Process of $68,000.
credit to Manufacturing Overhead of $6,000.
debit to Work in Process of $74,000.

6. Question : (TCO F) During February, Degan Inc. transferred $60,000 from Work in Process to Finished Goods and recorded a Cost of Goods Sold of $65,000. The journal entries to record these transactions would include a:

Student Answer:
debit to Finished Goods of $65,000.
credit to Cost of Goods Sold of $65,000.
credit to Work in Process of $60,000.
credit to Finished Goods of $60,000.

Page 2
1. Question : (TCO F) Whether a company uses process costing or job-order costing depends on its industry. A number of companies in different industries are listed below:
i. Brick manufacturer
ii. Contract printer that produces posters, books, and pamphlets to order
iii. Natural gas production company
iv. Dairy farm
v. Coal mining company
vi. Specialty coffee roaster (roasts small batches of specialty coffee beans)
For each company, indicate whether the company is most likely to use job-order costing or process costing.

2. Question : (TCO F) Job 827 was recently completed. The following data have been recorded on its job cost sheet:
Direct materials $61,050
Direct labor hours 1,332 labor hours
Direct labor wage rate $14 per labor-hour
Machine Hours 1,480 machine hours
Number of units completed 3,700 units
The company applies manufacturing overhead on the basis of machine-hours. The predetermined overhead rate is $13 per machine-hour. Compute the unit product cost that would appear on the job cost sheet for this job.

3. Question : (TCO F) Miller Company manufactures a product for which materials are added at the beginning of the manufacturing process. A review of the company’s inventory and cost records for the most recently completed year revealed the following information:
Units Materials Conversion
Work in process. Jan. 1 (80% complete with respect to conversion costs) 100,000 $100,000 $157,500
Units started into production 500,000
Costs added during the year:
Materials $650,000
Conversion $997,500
Units completed during the year 450,000
The company uses the weighted-average cost method in its process costing system. The ending inventory is 50% complete with respect to conversion costs.
Required:
i. Compute the equivalent units of production and the cost per equivalent units for materials and for conversion costs.
ii. Determine the cost transferred to finished goods.
iii. Determine the amount of cost that should be assigned to the ending work in process inventory.

4. Question : (TCO F) Burkhammer Inc. has provided the following data for the month of August. There were no beginning inventories; consequently, the direct materials, direct labor, and manufacturing overhead applied listed below are all for the current month.
Work in Process Finished Goods Cost of Goods Sold Total
Direct Materials $2,260 $12,180 $81,480 $95,920
Direct Labor $1,900 $14,500 $97,000 $113,400
Manufacturing overhead applied $1,590 $6,890 $44,520 $53,000
Total $5,750 $33,570 $223,000 $262,320
Manufacturing overhead for the month was underapplied by $9,000.
The company allocates any underapplied or overapplied overhead among work in process, finished goods, and cost of goods sold at the end of the month on the basis of the overhead applied during the month in those accounts.
Determine the cost of work in process, finished goods, and cost of goods sold AFTER allocation of the underapplied or overapplied overhead for the period.

For getting the instant digital download solution, Please click on the “PURCHASE” link below to get ACCT 505 Managerial Accounting_Week 2 Job Order and Process Costing Systems All three Sets Quiz Answer

For instant digital download of the above solution or tutorial, please click on the below link and make an instant purchase. You will be guided to the PAYPAL Standard payment page wherein you can pay and you will receive an email immediately with a download link. Please note that in case of technical glitch, the solutions will be emailed to you within 24 hours.

In case you find any problem in getting the download link or downloading the tutorial, please send us an email on mail@genietutorial.com

ACCT 505 Week 2

Posted on

MGMT 410 Human Resource Management Week 2 Case Study Off the Job Behaviors A+ Answer

MGMT 410 Human Resource Management Week 2 Case Study Off-the-Job Behaviors_Complete Answer

Behaviors Human Off-the-Job Resource Management MGMT410 1. Do you believe Oilers employee rights were violated? Explain your position. I think that Amendment 1 of the United States Constitution say it best, AMENDMENTS TO THE CONSTITUTION OF THE UNITED STATES OF AMERICA – AMENDMENT [I.] 2 Congress shall make no law respecting an establishment of religion, or prohibiting the free exercise thereof; or abridging the freedom of speech, or of the press; or the right of the people peaceably to assemble, and to petition the Government for a redress of grievances. http://www.gpo.gov/fdsys/pkg/GPO-CONAN-1992/pdf/GPO-CONAN-1992-7.pdf . Mr. Peter Oiler certainly has unique situation that he/she has to contend with. But by virtue of the amount of negative publicity that the food chain, Winn Dixie would have to contend with, I think that they made a wise decision. Case-and-Point; say for instance, Mr. Oiler was on a normal outing and decided that he wanted to drink a little. Hes dress in his finest dress while at the Shady Grove Bar and Grill, when all of a sudden, someone from Winn Dixie recognizes him. They start a conversation and a fight ensues. Mr. Oiler and his co-worker are eventually pulled apart, but the damages are insurmountable. The owners of Shady Grove Bar and Grill, through a police report fine that Mr. Oiler is employed at Winn Dixie, and file a Class-Action Suit against the corporation. The fact of the matter is, no one cares who you are, until they find out that you work for a large corporation. From a Human Resources perspective, I feel that we are all under the gun. For every action that you take, there is a equally and determining reaction. In this world of recessions and downsizing, every employee has to really think about the consequences that surrounds their offthe Job behaviors. Im not saying that Mr. Oiler is right or wrong in his actions, but the bottom line is, that employers can let you go sometimes and not even have a legitimate reason. So why would you want to put any undue stress or pressure on yourself. 2. What do you see as the consequences of organizations that punish employees for certain offthe-job behaviors? Explain.

For getting the instant digital download solution, Please click on the “PURCHASE” link below to get MGMT 410 Human Resource Management Week 2 Case Study Off-the-Job Behaviors_Complete Answer

For instant digital download of the above solution or tutorial, please click on the below link and make an instant purchase. You will be guided to the PAYPAL Standard payment page wherein you can pay and you will receive an email immediately with a download link. Please note that in case of technical glitch, the solutions will be emailed to you within 24 hours.

In case you find any problem in getting the download link or downloading the tutorial, please send us an email on mail@genietutorial.com

 

 MGMT-410-Human-Resource-Management-Week-2

 

Posted on

MGMT 592 Leadership in the 21st Century Week 2 Skill Development Exercise Answer

MGMT 592 Leadership in the 21st Century Week 2 Skill-Development Exercise Answer

Skill Development Assignments
Part 1 For each objective below, identify the missing criteria and rewrite the objective so that it meets all essential criteria.

Part 2. Write three educational, personal, and career objectives you want to accomplish. Your objectives can be as short term as something you want to accomplish today, or as long term as 20 years from now. Be sure your objectives meet the criteria for effective objectives.

Please click on the “PURCHASE” link below to get MGMT 592 Leadership in the 21st Century Week 2 Skill-Development Exercise Answer.

For instant digital download of the above solution or tutorial, please click on the below link and make an instant purchase. You will be guided to the PAYPAL Standard payment page wherein you can pay and you will receive an email immediately with a download link. Please note that in case of technical glitch, the solutions will be emailed to you within 24 hours.

In case you find any problem in getting the download link or downloading the tutorial, please send us an email on mail@genietutorial.com

Week 2

Posted on

HADM 542 W13 MANAGERIAL ACCT HTH CARE ORG Assignment Case 3-1 Lakeside Hospital Answer

HADM 542 W13 MANAGERIAL ACCT HTH CARE ORG Assignment Case 3-1 Lakeside Hospital Answer

HADM 542 W13 MANAGERIAL ACCT HTH CARE ORG Assignment Case 3-1 Lakeside Hospital Answer

HADM 542 W13 MANAGERIAL ACCT/HTH CARE ORG Assignment: Case 3-1 Lakeside Hospital
Assignment: Case 3-1 Lakeside Hospital
For Case 3-1: answer questions 1 – 5.
1. Breakeven Volume Analysis
2. Fair Share of Overhead:
3. Contribution income statement for the hospital under full capacity.
4. Dr. Newell……………..
5. Dr. Lawrence………………

For instant digital download of the above solution, Please click on the “PURCHASE” link below to get the tutorial for HADM 542 W13 MANAGERIAL ACCT HTH CARE ORG Assignment Case 3-1 Lakeside Hospital Answer

For instant digital download of the above solution or tutorial, please click on the below link and make an instant purchase. You will be guided to the PAYPAL Standard payment page wherein you can pay and you will receive an email immediately with a download link. Please note that in case of technical glitch, the solutions will be emailed to you within 24 hours.

In case you find any problem in getting the download link or downloading the tutorial, please send us an email on mail@genietutorial.com

HADM 542

Posted on

HSM 541 Health Service Systems Week 2 You Decide Recommendations Recruiting Nurses Marketing Strategies Answer

HSM 541 Health Service Systems Week 2 You Decide Recommendations Recruiting Nurses Marketing Strategies Answer

HSM 541 Health Service Systems Week 2 You Decide Recommendations Recruiting Nurses Marketing Strategies Answer

You Decide Scenario Scenario Summary
You are the new Chief Executive Officer (CEO) of Middlefield Hospital. Middlefield Hospital is a 450-bed tertiary care facility in a major urban area in the Northeast. The hospital is an integrated health system that provides the full array of inpatient and outpatient services. The hospital enjoys a reputation for quality care in the area.
As the new CEO, you have learned that the hospital’s employee turnover rate exceeds 20%, and there are over 100 nursing vacancies. You have also learned the following facts that may be impacting these workforce shortages:
A new hospital has recently opened in your market area that has produced competition for Middlefield Hospital.
Employee morale has deteriorated over the last 12 months.
Essex University (a local college) is considering eliminating its nursing degree program because there is continual difficulty in recruiting well qualified instructors.
Your Role/Assignment
The board of directors has asked that you provide a 750-word report detailing your strategies and recommendations to overcome the workforce shortages and to improve employee morale. The strategies and recommendations should be as specific as possible and include the resources needed for implementation. Your primary text and journal/website research must be used as a reference to support your analysis.

For instant digital download of the above solution, Please click on the “PURCHASE” link below to get the tutorial for HSM-541-Health Service Systems Week 2_You Decide Recommendations Recruiting Nurses Marketing Strategies

For instant digital download of the above solution or tutorial, please click on the below link and make an instant purchase. You will be guided to the PAYPAL Standard payment page wherein you can pay and you will receive an email immediately with a download link. Please note that in case of technical glitch, the solutions will be emailed to you within 24 hours.

In case you find any problem in getting the download link or downloading the tutorial, please send us an email on mail@genietutorial.com

HSM-541-Health-Service-Systems-Week-2_You-Decide

Posted on

PROJ 591 Sustainability Proj Management Week 2 Green Multiuse Academic Building Project Charter Answer

PROJ 591 Sustainability Proj Management Week 2 Green Multiuse Academic Building Project Charter


Course Project week 2: Development of a Green Multiuse Academic Building

The embedded US Green Building Council link below is to www.usgbc.org
The project for this course is a group assignment where each group will follow project management best practices and prepare several key project management deliverables to support the efficient and effective delivery of a green multiuse academic building. To learn more about green building practices, view the Tutorial and visit the US Green Building Council http://www.usgbc.org/ to learn about their LEED program, which stands for Leadership in Energy and Environment Design. LEED is a series of guidelines to ensure buildings are sustainable. The guidelines address the following issues that you should consider for your project:
• Site Location
• Water Conservation
• Energy Efficiency
• Materials
• Indoor Air Quality

Project Charter Week 2 Using the template provided in Doc Sharing (Project Charter Template), develop a project charter. The charter should include (1) background and description, (2) objectives and benefits, (3) initial risks, (4) assumptions, (5) constraints, (6) success criteria, and (7) management of change requests.

Please click on the “PURCHASE” link below to get PROJ 591 Sustainability Proj Management Week 2 Green Multiuse Academic Building Project Charter.

For instant digital download of the above solution or tutorial, please click on the below link and make an instant purchase. You will be guided to the PAYPAL Standard payment page wherein you can pay and you will receive an email immediately with a download link. Please note that in case of technical glitch, the solutions will be emailed to you within 24 hours.

In case you find any problem in getting the download link or downloading the tutorial, please send us an email on mail@genietutorial.com

PROJ 591 week 2